Modular control valve
Modular control valves are normally mounted onto a valve skid with piping at the rear, or underneath, to allow quick changes to be made for maintenance purposes. Piping can, however, be dispensed with almost totally by mounting valves onto a manifold block- with interconnections formed by drilled passages in a solid block or by cut-outs on a plate-formed manifold.
Modular valve assemblies allow piping to be reduced still further. These follow standards laid down by the Comit~ European des Transmission Oleophydrauliques et Pneumatiques and are consequently known as CETOP modular valves.
Modular valves consist of a base plate and a wide variety of modules which may be stacked up on top. At the top of the stack a spool valve or crossover plate is fitted. Quite complicated assemblies can be built up with minimal piping and the ease of a child’s building block model.
- MTCV-03-W Hydraulic Modular Check and Throttle Valve
- 2.1875 in
- 11.0000 in
- TG2G/MTCV Modular Throttle/Check Hydraulic Valve
- 5-3/4 in
- Set Screw
- MDG-01 Hydraulic Remote Control Modular Relief Valve
- Standard
- Steel
- M-J-CBC Modular Overcenter Pilot Assisted Hydraulic Relief Valve
- [Aluminum Alloy] 201
- Double
- MSPR-02 Hydraulic Solenoid Reducing Valve Part
- Steel
- 174 mm
- Hydraulic Modular Control Valve Series
- 2.2500 in
- UCECH200
- MBRV-02 Hydraulic Modular Reducing Valve Part
- RoHS, REACH, DRC Con
- Sintered Bronze Oil-
- MSCV Modular Counter Balance Hydraulic Valve
- 3.6260 in
- Uncoated
- MCV-03 Hydraulic Modular Check Valve
- Square flange shape
- 113000
- MTCV-03-A/B Hydraulic Modular Check and Throttle Valve
- 2.0000 in
- Two-Bolt Base
- MCV-02 Hydraulic Modular Check Valve
- Needle Rollers
- Crowned