Modular control valve
Modular control valves are normally mounted onto a valve skid with piping at the rear, or underneath, to allow quick changes to be made for maintenance purposes. Piping can, however, be dispensed with almost totally by mounting valves onto a manifold block- with interconnections formed by drilled passages in a solid block or by cut-outs on a plate-formed manifold.
Modular valve assemblies allow piping to be reduced still further. These follow standards laid down by the Comit~ European des Transmission Oleophydrauliques et Pneumatiques and are consequently known as CETOP modular valves.
Modular valves consist of a base plate and a wide variety of modules which may be stacked up on top. At the top of the stack a spool valve or crossover plate is fitted. Quite complicated assemblies can be built up with minimal piping and the ease of a child’s building block model.
- MSC-03-W Hydraulic Solenoid Modular Check Valve
- Alloy Steel
- 8483.30.8070
- MLN Modular Shock Less Hydraulic Valve
- SAE 841, CT-1000-K26
- 25 mm
- MTV Modular Hydraulic Throttle Valve
- Uncoated
- Non-Flanged Cup
- MTCV-06-A/B Hydraulic Modular Check and Throttle Valve
- Labyrinth
- Four-Bolt Base
- MPCV-04-W Hydraulic Pilot Operated Modular Check Valve
- 1045 Carbon Steel
- Yes (with retaining
- MCV-06 Hydraulic Modular Check Valve
- Cast Iron
- No
- M-J-CBE-03-W Modular Control Hydraulic Overcenter Valve
- 6.5000 to 7.0000 in
- 2.5000 in
- M-J-CBC-03-A/B Modular Control Hydraulic Overcenter Valve
- 1.5000 in
- Click here
- MTCV-06-W Hydraulic Modular Check and Throttle Valve
- Round
- Click here
- MLN-02-P Hydraulic Shock Less Modular Control Valve
- Metric System
- 36000
- MCV Modular Check Hydraulic Valve Parts
- Standard
- J
- M-J-CBC-03-W Modular Control Hydraulic Overcenter Valve
- Contact with Flinger
- Cast Iron