Directional control valve
Directional Control Valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. The position of the spool restricts or permits flow, thus it controls the fluid flow.
Directional control valves can control the start, stop and change in direction of flow of a pressure medium (i.e. hydraulic oil). For this reason, they are also referred to as switching valves. Directional control valves are available as spool valves, poppet valves or rotary slide valves. Rotary slide valves, however, are no longer commonly used due to low operating pressure (up to 70 bar). Directional control valves without proportional control are referred to as switching valves.
- PF-50-20 Hydraulic Prefill Valve Directional Control
- 120,000
- 170,000
- HF 4211-10-23 HG type Hydraulic Stop Valve Part
- BS 212 /S 7P62U
- 0,6 mm
- Rexroth hydraulic 4we directional control solenoid valve
- 160
- 160x222.55x109
- HT 4211-25-23 HG type Hydraulic Stop Valve Part
- straight bore, lube
- 270
- PDF-125-20 Hydraulic Prefill Valve Directional Control
- 315 mm
- 1292 mm
- CPDT-06 Pilot Operated Check Valve Hydraulic Part
- 7300000 N / Static l
- 9,5 mm
- HG 4211-10-23 HG type Hydraulic Stop Valve Part
- 7305CDB
- 62 mm