Mld Industry Technology Co., Ltd.

Directional control valve

Directional Control Valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. The position of the spool restricts or permits flow, thus it controls the fluid flow.

 

Directional control valves can control the start, stop and change in direction of flow of a pressure medium (i.e. hydraulic oil). For this reason, they are also referred to as switching valves. Directional control valves are available as spool valves, poppet valves or rotary slide valves. Rotary slide valves, however, are no longer commonly used due to low operating pressure (up to 70 bar). Directional control valves without proportional control are referred to as switching valves.

 

HT 4211-15-23 HG type Hydraulic Stop Valve Part
66,675
395S/394A
HF 4211-50-23 HG type Hydraulic Stop Valve Part
CYSD
25x47x8
CRG-06-10 Check Valve Hydraulic Part
13 mm
28000 r/min
Hydraulic Directional Control Valve Series Parts
713667170
R150.20
CRG-03-10 Check Valve Hydraulic Part
4 100 r/min
NTN
CRG-10-20 Check Valve Hydraulic Part
26,000
26,000 mm
CRG-03-20 Check Valve Hydraulic Part
42.069 mm
19.05 mm
DCG Cam Operated Directional Hydraulic Valve
10 mm
3NC6003HT4 GF
HF 4211-15-23 HG type Hydraulic Stop Valve Part
36 mm
63,7 kN
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Hydraulic Pump Parts
Hydraulic Pump
Hydraulic Motor
Cartridge valve
Directional control valve
Modular control valve
Pressure control valve
Flow control valve
Hydraulic Valve
Hydraulic Piston Pump